What Is the Process for Asphalt Sealcoating in Omaha?
If you want to make your asphalt shine like new, remember the old saying, ‘An ounce of prevention is worth a pound of cure.’ So, what is the process for asphalt sealcoating in Omaha?
Well, let us guide you through it.
First, you’ll need to prepare the surface by cleaning it thoroughly. Then, apply the primer to ensure a strong bond.
Next, mix and apply the sealcoat, making sure to cover every inch. Allow it to cure and dry, giving your asphalt that fresh, protected look.
Finally, clean up any mess and add those finishing touches. With this process, you’ll have a smooth, beautiful driveway or parking lot that will make you feel like you truly belong.
Preparing the Surface
Before you can begin the process of asphalt sealcoating in Omaha, you must first prepare the surface by thoroughly cleaning and inspecting it.
Start by removing any debris, dirt, or vegetation using a broom or blower.
Next, inspect the surface for any cracks, potholes, or damage that may need repair. This step is crucial to ensure a smooth and long-lasting sealcoating application.
Applying the Primer
To begin applying the primer for asphalt sealcoating in Omaha, ensure the surface is thoroughly cleaned and inspected. This step is crucial as it creates a clean and smooth base for the primer to adhere to.
Use a power washer or a stiff-bristled brush to remove any dirt, debris, or vegetation.
Inspect the surface for cracks or potholes, and repair them before proceeding.
Mixing and Applying the Sealcoat
How do you properly mix and apply the sealcoat for asphalt sealcoating in Omaha?
It’s important to start by thoroughly mixing the sealcoat using a paddle mixer or a mechanical mixer. Make sure the sealcoat is well-blended and free of any clumps.
Then, using a squeegee or a sprayer, apply the sealcoat evenly onto the surface of the asphalt. Work in small sections, overlapping each pass to ensure complete coverage.
Remember to follow the manufacturer’s instructions for drying and curing times.
Curing and Drying
Allow the sealcoat to cure and dry completely before allowing any traffic on the newly sealed asphalt surface. This step is crucial in ensuring the longevity and effectiveness of the sealcoating.
It typically takes around 24 to 48 hours for the sealcoat to fully cure and dry, depending on weather conditions. During this time, it’s important to keep the area clear of any vehicles or foot traffic.
Patience is key in achieving a durable and long-lasting sealcoating job.
Cleaning up and Finishing Touches
You should carefully clean up any excess sealcoat and apply any finishing touches to ensure a professional and polished result. Take the time to inspect the sealcoated area for any stray drips or spills and remove them promptly.
Use a broom or blower to sweep away any debris or loose particles that may have accumulated during the process.
Get in touch with us today
Discover how our seasoned team is ready to address all your seal coating requirements in Omaha. No project is too large or too small for our expertise! Reach out to us by phone or complete our form today to get started.